Analysis of the Cause of False Liquid Level in Magnetic Flap Level Meter

November 17, 2021

Magnetic flip level gauge fake liquid level analysis of the reasons:

Magnetic flap level gauge can be directly used to observe a variety of containers of liquid level height. It is suitable for oil, chemical industry level instructions, the liquid level gauge structure is simple, intuitive observation, clear, non-blocking, no leakage, easy installation, easy maintenance. The upper and lower flanges of the glass plate are connected with the container to form a communication device. The actual height of the liquid level in the container can be directly observed through the glass plate. The upper and lower valve is equipped with safety ball, when the glass is damaged by accident, the steel ball will automatically seal under the pressure inside the container to prevent the liquid in the container from overflowing and ensure the safety of the operator. Calculate the cause of the fake liquid level analysis?

1, the external interference signal is too large, resulting in the circuit is a false signal, not the actual measurement of the signal;

2, the level gauge waveguide wire failure, such as loose, poor water seal corrosion, resulting in signal distortion;

3, the waveguide wire is not installed correctly, the signal transmission distortion;

4, signal processing circuit failure.

Předchozí

další

Kontaktujte nás

Author:

Ms. Lily Yu

E-mail:

admin@lyprinting.com

Phone/WhatsApp: